top of page




For use with ESAB CAN-controlled power sources and motors.


  • One standard controller for all of ESAB's SAW equipment whether DC, AC, or AC/DC power source, tractors and Column and Boom. The standard controller reduces the need for operator training. 
  • Reduces risk of operator-caused weld defects, and ensures compliance to WPS by limiting operator access to only the required parameters. The PEK indicates if welding parameters are outside the set limits. 
  • Easy to change from one job to the next with 255 programmable parameter memories that allow individual settings for all stations to be stored in each unit. 
  • Easy to replicate parameters from one welding station to the other or from computer to the controller using a USB memory drive. No need for a laptop and Ethernet connection at the welding station. 
  • Back up weld and quality data stores all relevant data for monitoring purposes. 
  • Native language support for 19 native languages includning English, Chinese, French, German, Korean, etc. 
  • Built in step controller for step/spiral cladding applications

    Power Requirements and Connections

    Connection Type to Power Source Burndy 12-p
    Enclosure Class IP23
    Input Power max 900 VA
    Motor Connection Adjustment, A2 and A6 connection of 2 motors, current 6A cont, max 10A
    Supply Voltage 42V AC, 50/60 Hz
    Valve Output 1pc, 42 V AC, 0.5A

    Power Specifications

    Enclosure Class IP23

    Speeds and Temperatures

    Operating Temp -15 - +45 °C (59 - 113 °F)
    Relative Humidity 98 %
    Welding Speed 0.1-2.0 m/min (4-79 in./min)
    Wire Feed Speed 0.3-25 m/min (12-984 in./min)

    Weights and Dimensions

    Height 11 in. (273 mm)
    Length 7 in. (246 mm)
    Weight 14.5 lb (6.6 kg)
    Width 9.25 in. (235 mm)
bottom of page